
Built different, delivered better
Resin surface assessed
We check the affected surface, existing joints and surrounding material before agreeing the repair scope.
Edge details checked
Mortar or jointing material is selected to suit the brick, stone, chimney or paving involved.
Repair suitability confirmed first
Loose or deteriorated material is removed, the joints are prepared and the finish is matched to the surface.
Assess the repair needs of a resin-bound driveway
Resin-bound driveways are designed to create a largely continuous surface, so not every defect is a conventional joint problem. Deterioration can occur at edges, transitions and suitable repair junctions. We assess the surface and the specific area before confirming whether a local resin driveway joint repair is practical.
A repair needs to bond and sit appropriately with the existing surface. We look at the condition of the resin-bound material, the edge detail, the substrate and any movement or breakage nearby. The assessment helps establish whether the issue is limited to a repairable edge or junction, or whether a wider surface problem is present.


Use a compatible repair approach
Where a local repair is suitable, the affected area is prepared and loose or deteriorated material is addressed. Replacement material is selected to suit the existing resin system as closely as practical. Colour, aggregate appearance and texture may not be an exact match, particularly where the original surface has weathered.
The appearance and durability of a repair depend on the condition of the original surface, the extent of the defect and material compatibility. We explain the likely finish and any limitations before work is agreed. If the defect is caused by movement or failure below the resin layer, that issue may need separate attention.
Areas covered: Airspace Wall Pointing serves Belfast, Lisburn, Bangor, Newtownards, Ballymena, Coleraine, Derry / Londonderry, Omagh, Newry and Enniskillen. Contact us to confirm availability for your property.
Frequently asked questions
Q: Can every resin-bound driveway defect be repaired locally?
A: No. Suitability depends on the type and extent of the damage, the condition of the substrate and the compatibility of repair materials. We assess the area first.
Q: Will the repaired area match the existing resin exactly?
A: An exact match cannot always be guaranteed. Aggregate colour and texture may vary, and the existing surface may have weathered since installation.
Q: Can damaged driveway edges be repaired?
A: Some edge deterioration can be addressed where the surrounding surface and supporting detail remain suitable. We inspect the edge and adjoining area before recommending a repair.

