top of page
Tall red brick chimney stack with lead flashing on a terracotta tiled roof alongside scaffolding platform.

Chimney repointing to renew damaged and weathered mortar joints

Exposed joints inspected | Failed mortar removed | Chimney masonry checked

The difference we deliver

Exposed joints inspected

We check the affected surface, existing joints and surrounding material before agreeing the repair scope.

Failed mortar removed

Mortar or jointing material is selected to suit the brick, stone, chimney or paving involved.

Chimney masonry checked

Loose or deteriorated material is removed, the joints are prepared and the finish is matched to the surface.

Renew mortar exposed to the weather

Chimneys are exposed to rain, frost and wind from several directions. Over time, mortar joints can crack, crumble or wash out, leaving gaps in the brickwork. Our chimney repointing service removes deteriorated mortar and renews the joints with a suitable material to improve weather resistance and help limit further deterioration.

Mortar failure may occur alongside damaged bricks, loose masonry or defects around the chimney top. We assess the visible condition of the stack and identify related issues that could affect the repair. Repointing is suitable where the masonry remains sound enough to support renewed joints; it is not a replacement for repairing unstable or fractured brickwork.

Red brick chimney stacks with lead apron flashing set on a dark grey tiled pitched roof.
Tall red brick chimney stack with lead flashing on a terracotta tiled roof alongside scaffolding platform.

How chimney repointing is carried out

The affected joints are identified and loose mortar is carefully removed to a suitable depth. The joints are prepared before compatible replacement mortar is installed and finished. Access and weather conditions are considered as part of the work, and any separate issues found during the assessment are explained.

Sound, well-maintained joints help limit water entry through gaps in chimney brickwork. If moisture is entering through damaged leadwork, cracked bricks, pots or the chimney top, those defects need separate attention. We explain what repointing can address and what lies outside the scope of the mortar repair.

Areas covered: Airspace Wall Pointing serves Belfast, Lisburn, Bangor, Newtownards, Ballymena, Coleraine, Derry / Londonderry, Omagh, Newry and Enniskillen. Contact us to confirm availability for your property.

Frequently asked questions

Q: What are common signs that a chimney needs repointing?

A: Look for open joints, crumbling mortar, missing sections or loose fragments around the stack. We inspect the brickwork and related details before confirming the repair.

Q: Can chimney repointing stop every leak?

A: No. It can address leaks caused by failed mortar joints, but water may also enter through damaged bricks, leadwork, chimney pots or the top of the stack.

Q: Is chimney repointing different from wall repointing?

A: The basic aim is similar, but chimney access and exposure can make the assessment and work more specialised. The stack and adjoining details should be checked together.

Tall red brick chimney stack with lead flashing on a terracotta tiled roof alongside scaffolding platform.

Have your chimney joints inspected

Call us about crumbling chimney mortar, open joints or visible deterioration and request an assessment.

bottom of page