top of page
Repaired brick chimney stack with fresh mortar flaunching, a terracotta chimney pot with a metal vent cap, and surrounding roof tiles.

Brick repointing to renew worn or crumbling mortar

Careful joint assessment | Suitable mortar selection | Neat, consistent finishes

Why clients choose us

Careful joint assessment

We check the affected surface, existing joints and surrounding material before agreeing the repair scope.

Suitable mortar selection

Mortar or jointing material is selected to suit the brick, stone, chimney or paving involved.

Neat, consistent finishes

Loose or deteriorated material is removed, the joints are prepared and the finish is matched to the surface.

Restore the joints between your bricks

Mortar joints help hold brickwork together and limit the routes through which rain can enter. With time, exposure and movement can leave mortar cracked, loose or washed out. Our brick repointing service focuses on removing deteriorated material and renewing the joints with mortar selected to suit the existing brickwork. The aim is to improve protection and appearance without disturbing sound bricks unnecessarily.
Look for mortar that crumbles when touched, open gaps, recessed joints, loose fragments or visible cracking between bricks. Damp patches can have several causes, so we assess the wall and surrounding details before deciding whether repointing is the right response. Where individual bricks are damaged, we identify that separately rather than relying on new mortar to conceal the problem.

Newly built orange-red brick chimney stack with lead flashing, weep holes along the base, and terracotta roof tiles.
Repaired brick chimney stack with fresh mortar flaunching, a terracotta chimney pot with a metal vent cap, and surrounding roof tiles.

A considered approach to brick repointing

We inspect the condition of the joints and the bricks around them, agree the areas to be treated, remove failed mortar to an appropriate depth, and prepare the joints before filling them. The replacement mortar and finished profile are chosen with the brickwork in mind. We then clear away residue and review the completed sections.
Brick type, age, exposure and the condition of the original mortar all influence material choice and finish. A mortar that is too hard or poorly matched can create problems for some brickwork. We consider these details before work begins and explain where separate brick repairs or further investigation may be needed.
Areas covered: Airspace Wall Pointing serves Belfast, Lisburn, Bangor, Newtownards, Ballymena, Coleraine, Derry / Londonderry, Omagh, Newry and Enniskillen. Contact us to confirm availability for your property.

Frequently asked questions

Q: How do I know if my brickwork needs repointing?

A: Crumbling mortar, open joints, missing sections and persistent gaps are common signs. We inspect the wall to distinguish failed pointing from damaged bricks or another source of moisture.

Q: Do you remove the old mortar before repointing?

A: Yes. Loose and deteriorated mortar is removed to a suitable depth so the replacement material can form a sound joint. Applying a thin surface layer over failing mortar is not a substitute for proper preparation.

Q: Can you repoint only one section of a wall?

A: Yes. Partial repointing may be appropriate where deterioration is limited and the surrounding joints remain sound. The extent is agreed after inspecting the wall.

Repaired brick chimney stack with fresh mortar flaunching, a terracotta chimney pot with a metal vent cap, and surrounding roof tiles.

Arrange a brickwork assessment

Tell us where the mortar is failing and whether the problem affects one area or several elevations. Contact Airspace Wall Pointing for a quotation.

bottom of page