
Our difference
Local defects identified
We check the affected surface, existing joints and surrounding material before agreeing the repair scope.
Failed mortar removed
Mortar or jointing material is selected to suit the brick, stone, chimney or paving involved.
Brick and stone joints considered
Loose or deteriorated material is removed, the joints are prepared and the finish is matched to the surface.
Deal with local mortar failure
Not every wall needs extensive repointing. A small number of cracked, loose or missing joints may need targeted attention before the surrounding masonry is affected. We assess the defect and the adjacent joints, then agree a repair that addresses the failed mortar rather than applying a thin surface coat over it.
Repairs may be appropriate where mortar has fallen out, cracks have opened along the joint, or sections have become soft and loose. We also look for signs of movement, damaged masonry or water entry that could explain why the joint has failed. The proposed work depends on the condition of the wall and the extent of the defect.


A focused repair process
We identify the affected sections, remove loose or unsuitable mortar, prepare the joint and refill it with a compatible material. The finish is shaped to sit appropriately with the surrounding pointing. Where the defect extends beyond the visible area, we explain why a wider section may need attention.
Fresh mortar can renew a failed joint, but it will not correct every underlying problem. Movement, damaged bricks or stones, faulty drainage and other building defects may need separate investigation. We explain the limits of the mortar repair so you can make an informed decision.
Areas covered: Airspace Wall Pointing serves Belfast, Lisburn, Bangor, Newtownards, Ballymena, Coleraine, Derry / Londonderry, Omagh, Newry and Enniskillen. Contact us to confirm availability for your property.
Frequently asked questions
Q: Can you repair only a few mortar joints?
A: Yes. Targeted work can be suitable where damage is limited and the surrounding joints are sound. We check the edges of the repair area before confirming the scope.
Q: Can cracked mortar simply be covered with new mortar?
A: A surface layer over loose or failing material is unlikely to provide a dependable repair. Failed mortar should be removed and the joint prepared before it is refilled.
Q: Do mortar joint repairs work for both brick and stone?
A: They can, but the repair material and finish must suit the masonry. We assess the surface before selecting the approach.

